Search results

This study aims to achieve customized prosthesis for total joint arthroplasty and total hip arthroplasty. Selective laser sintering (SLS) as additive manufacturing could enable small-scale fabrication of customized Ultra High Molecular Weight Polyethylene (UHMWPE) components; however, the processes for SLS of UHMWPE need to be improved.

This paper begins by improving the preheating system of the SLS fabricating equipment and then fabricating cuboids with the same size and cuboids with same volume and different size to study the warpage, demonstrating the effect of the value and uniformity of the preheating temperature on component fabrication. Warpage, density and tensile properties are investigated from the perspective of energy input density. Finally, complicated industrial parts are produced effectively by using optimized technological parameters.

The results show that components can be fabricated effectively after the optimization of the SLS technological parameters i.e. the preheating temperature the laser power the scanning interval and the scanning speed. The resulting warpage was found to be less than 0.1 mm along with the density as 83.25 and the tensile strength up to 14.1 Mpa. UHMWPE sample parts with good appearance and strength are obtained after ascertaining the effect of each factor on the fabrication of the sample parts.

It is very challenging to fabricate UHMWPE sample parts by SLS. This is a new step in the fabrication of customized UHMWPE sample parts.

This study aims to focus on the heat treatment influence on the corrosion resistance, adhesion of Streptococcus mutans and mechanical properties of CoCrMo alloys manufactured by the selective laser melting (SLM).

CoCrMo alloys were manufactured using the Dimetal-100 machine. X-ray diffraction (XRD), metallographic analysis, scanning electron microscopy (SEM), electrochemical corrosion, Vickers microhardness and tensile tests were used to characterize SLM-produced CoCrMo alloys and compare them with the ones manufactured by casting and with the ASTM F75 standard.

The electrochemical results showed that SLM900 samples had the best corrosion resistance in artificial saliva. The adhesion results showed least propagation and overall quantity of Streptococcus mutans on the SLM900 sample. The microhardness, tensile and yield strength of As-SLM, SLM900 and SLM1200D samples were measured according to the ASTM F75 standard. The elongation of SLM900 was less than 8 per cent, which does not meet the standard specifications. Analysis of the fracture morphology showed that the fracture mechanisms of As-SLM and SLM1200D belong to the quasi-cleavage fracture type, and the mechanical fracture mechanism of SLM900 can be characterized as brittle fracture.

This paper presents the adhesion properties of Streptococcus mutans on the surface of CoCrMo alloys manufactured by SLM and proposes how to regulate the effect of the heat treatment on the corrosion resistance and mechanical properties of CoCrMo alloys manufactured by SLM.

This paper aims to verify whether selective laser melting (SLM) could be used for manufacturing mold with conformal cooling channels and determine whether the mechanical properties development of SLM manufacturing maraging steel mold would be beneficial to improve the quality of mold.

A series of block specimens and cylindrical tensile specimens are manufactured by SLM, and then are heat treated by solution treatment (ST) and solution treatment + aging treatment (ST + AT), respectively. The development of microstructure, microhardness and tensile strength of specimens is investigated. Then, a mold with conformal cooling channels is designed and manufactured by SLM and machined after ST with microhardness decreasing.

The morphology of microstructure varies widely under different heat treatment. The microhardness and tensile strength decrease after ST with cellular structure broken, which is conducive to mechanical finishing for mold to improve surface accuracy. After that, the hardness and strength of the mold increase significantly by AT with the precipitation of Ni3Mo, Fe2Mo and Ni3Ti particles. The maraging steel mold with conformal cooling channels can be manufactured by SLM successfully. And the surface accuracy of mold could be improved easily by machining.

Compared with the traditional mold with simple cooling channels, the mold with conformal cooling channels can be manufactured by SLM directly. The hardness of maraging steel mold manufactured by SLM can be reduced through ST, which is conducive to mechanical finishing for overcoming the defect of low precision of SLM directly manufacturing mold. This provides a new way for manufacturing mold of high quality.

This paper aims to summarize design rules based on the process characteristics of selective laser melting (SLM) and structural optimization and apply the design rules in the lightweight design of an aluminum alloy antenna bracket. The design goal is to reduce 30 per cent of the weight while maintaining the stress levels in the original part.

To reduce weight as much as possible, the titanium alloy with higher specific strength was selected during the process of optimization. The material distribution of the bracket was improved by the topology optimization design. The redesign for SLM was used to obtain an optimization model, which was more suitable for SLM. The component performance was improved by shape optimization. The modal analysis data of the structural optimization model were compared with those of the stochastic lightweight model to verify the structural optimization model. The scanning data were compared with those of the original model to verify whether the model was suitable for SLM.

Structural optimization design for antenna bracket realized the mass decrease of 30.43 per cent and the fundamental frequency increase of 50.18 per cent. The modal analysis data of the stochastic lightweight model and the structural optimization model indicated that the optimization performance of structural optimization method was better than that of the stochastic lightweight method. The comparison results between the scanning data of the forming part and the original data confirmed that the structural optimization design for SLM lightweight component could achieve the desired forming accuracy.

This paper summarizes geometric constraints in SLM and derives design rules of structural optimization based on the process characteristics of SLM. SLM design rules make structural optimization design more reasonable. The combination of structural optimization design and SLM can improve the performance of lightweight antenna bracket significantly.

Robo-advisory has become an increasingly popular asset management tool in recent decades. This paper studies the association between robo-advisor usage and perceived financial satisfaction.

Using data extracted from the National Financial Capability Study 2015 (NFCS2015), the present study carried out a logistic analysis that examines the association between robo-advisory and perceived financial satisfaction. This model also studies the interaction effect of age on this association.

The present study finds that robo-advisor usage is positively correlated with a person’s perceived financial satisfaction after controlling for covariates related to financial literacy and other demographic factors. Moreover, the present study reveals that age moderates the association between robo-advisory usage and financial satisfaction. The results are robust after regressing financial satisfaction on robo-advisory by different age groups.

This paper extends existing literature on robo-advisory by showing that robo-advisory usage relates to a higher level of financial satisfaction. This finding helps understand the rapidly increasing trend of robo-advisory in the financial industry. Moreover, the present study reveals a moderate effect of age on the association between robo-advisory usage and perceived financial satisfaction.

This review aims to give a critical view of the wheel/rail high frequency vibration-induced vibration fatigue in railway bogie.

Vibration fatigue of railway bogie arising from the wheel/rail high frequency vibration has become the main concern of railway operators. Previous reviews usually focused on the formation mechanism of wheel/rail high frequency vibration. This paper thus gives a critical review of the vibration fatigue of railway bogie owing to the short-pitch irregularities-induced high frequency vibration, including a brief introduction of short-pitch irregularities, associated high frequency vibration in railway bogie, typical vibration fatigue failure cases of railway bogie and methodologies used for the assessment of vibration fatigue and research gaps.

The results showed that the resulting excitation frequencies of short-pitch irregularity vary substantially due to different track types and formation mechanisms. The axle box-mounted components are much more vulnerable to vibration fatigue compared with other components. The wheel polygonal wear and rail corrugation-induced high frequency vibration is the main driving force of fatigue failure, and the fatigue crack usually initiates from the defect of the weld seam. Vibration spectrum for attachments of railway bogie defined in the standard underestimates the vibration level arising from the short-pitch irregularities. The current investigations on vibration fatigue mainly focus on the methods to improve the accuracy of fatigue damage assessment, and a systematical design method for vibration fatigue remains a huge gap to improve the survival probability when the rail vehicle is subjected to vibration fatigue.

The research can facilitate the development of a new methodology to improve the fatigue life of railway vehicles when subjected to wheel/rail high frequency vibration.

This study examines the effect of local government debt (LGD) on corporate earnings management using 25,624 firm-year observations from 2007 to 2019.

Pooled ordinary least squares (OLS) regression is used to examine the impact of LGD on earnings management. A difference-in-differences (DID) method is also used to alleviate potential endogeneity.

Results show that LGD motivates firms to increase earnings management, especially income-decreasing earnings management. Findings are robust to DID method and robustness tests. Heterogeneity analyses show that the positive effect of LGD on earnings management is pronounced in firms with political dependence and moderated by external governance mechanisms. Further discussions indicate that tax enforcement is an underlying channel for LGD to affect earnings management. Firms engage in downward real earnings management by increasing their abnormal discretionary expenditures and higher LGD leads to a greater book-tax difference in those firms that manipulate income-decreasing earnings management.

This study contributes towards examining the political costs hypothesis, the microeconomic effects of LGD and the determinants of earnings management.